Case Studies

FLAME-PROOF / EXP-PROOF / CHEMICAL

   Next : Check out the range of products we offer?Products.html

Tag: Induction Lighting, induction lighting Malaysia, Malaysia energy saving light, energy saving light, green lighting Malaysia, Malaysia lighting, green Malaysia, induction lighting Malaysia, eco-cs induction, lighting

Copyright 2012 AIP GROUP SDN. BHD. All rights reserved

FACTORY / WAREHOUSESFACTORY.html
COMPLEXESCOMPLEX.html
INDOOR LIGHTINGINDOOR.html
STREET LIGHTINGSTREET.html
TUNNELTUNNEL.html
OUTDOOR LIGHTINGOUTDOOR.html
OFFICESOFFICES.html
FLAME-PROOF

CASE A: KOREA NATIONAL OIL CORPORATION (KNOC)

Energy Consumption

Before:         250W (SODIUM LAMP)

After:            80W (INDUCTION)


Energy Saved (as per kWh):

    = (80-250) / 250 W

    = -68% savings

Summary

The previous flame proof lighting was using 250W High Pressure Sodium. The change propose was to reduce energy consumption and change to 80W induction lighting. 


From the brightness reading above, we were successful to improve the brightness level by up to 188% from the previous lighting with Sodium lamps even with 68% savings achieved. Overall uniformity of brightness and lighting experience has also improve significantly. This high quality steel frame flame proof lighting achieve the highest standards of IECX standards for flame proof usage in highly flammable area and zone.

Brightness

Before:80 lux

After:230 lux


Brightness Improvement

= 230 - 80 / 80 lux

=+188% improvement

CASE B:  LG CHEMICAL SOUTH KOREA

Energy Consumption

Before:         250W (SODIUM LAMP)

After:            80W (INDUCTION)


Energy Saved (as per kWh):

    = (80-250) / 250 W

    = -68% savings

Summary

The previous flame proof lighting was using 250W High Pressure Sodium. The change propose was to reduce energy consumption and change to 80W induction lighting. 


From the brightness reading above, we were successful to improve the brightness level by up to 186% from the previous lighting with Sodium lamps even with 68% savings achieved. Overall uniformity of brightness and lighting experience has also improve significantly. This high quality steel frame flame proof lighting achieve the highest standards of IECX standards for flame proof usage in highly flammable area and zone.

Brightness

Before:70 lux

After:200 lux


Brightness Improvement

= 200 - 70 / 70 lux

=+186% improvement